Quick question: Thermostats switch cooling equipment on and off to hold a set temperature. In refrigeration, the main types are mechanical (capillary), electronic digital and multi-relay temperature controllers. In AC, room thermostats control fan coils and valves. To choose one, match the temperature range, supply voltage, relay rating and sensor type, then set the set point and differential. Typical set points are 0 to 5 °C for chilled storage and -18 °C or below for frozen.
A badly set thermostat wastes power, causes short cycling and can spoil stock. If you fit or replace thermostats for cold rooms, display coolers or AC units, this guide shows how to pick the type, range and settings.
What Does a Thermostat Do in Refrigeration and AC?
A thermostat senses temperature and opens or closes a switch. In refrigeration, it controls the compressor, and sometimes fans or defrost. In AC, it tells a fan coil unit, valve or compressor when to run. The temperature you set is the set point.
What Are the Main Types of Thermostats?
| Type | How it works | Best for | Watch out for |
| Mechanical (capillary) | A gas-filled bulb and tube move a switch | Simple coolers and cold rooms | Less precise, manual dial |
| Electronic digital | NTC probe, display and relay | Accurate cold rooms and freezers | Needs a power supply and good probe placement |
| Temperature controller | Several relays with defrost and alarm | Rooms needing defrost control | More settings to set |
| Room (wall) thermostat | Senses room air to run a fan coil or valve | Comfort cooling | Keep away from sun and vents |
What Set points Should You Use?
| Application | Typical setpoint |
| Chilled food storage | 0 to 5 °C |
| Frozen storage | -18 °C or below |
| Comfort AC | 22 to 25 °C |
UAE food storage rules commonly call for chilled food at 5 °C or colder and frozen food at -18 °C or colder. Always confirm with your municipality and the product’s own storage needs.
What Is a Differential and Why Does It Matter?
The differential is the gap between the temperature where the compressor stops and where it restarts. Too small, and it starts too often. Too large, and the room swings too much. For cold rooms, 2 to 4 K is common.
How Do You Choose the Right Thermostat?
Step 1: Define the application. Cold room, display cooler, freezer or AC.
Step 2: Pick the type. Use mechanical for simple jobs, electronic for accuracy, and a controller if you need defrost or alarms.
Step 3: Check the range. The range should cover your set point, ideally mid-scale. A -35 °C to +35 °C range covers both chilled and frozen duty.
Step 4: Check voltage and relay rating. Confirm the supply, such as 230 V, and the relay current. If the compressor draws more, switch it through a contractor.
Step 5: Check the sensor. Choose the probe length and IP rating for the location.
Step 6: Set the set point and differential.
Worked example: A dairy cold room needs 2 to 4 °C. Set the cut-out at 2 °C with a 2 K differential, and the compressor restarts at 4 °C. That keeps the room within 2 to 4 °C, below the 5 °C limit.
Why Does UAE Climate Change Thermostat Selection?
- Heat: Frequent door openings and high ambient temperatures add load, so units cycle more. Keep the probe away from the door.
- Dust and humidity: Choose a sealed enclosure, such as IP65, for wet or dusty areas.
- Accuracy: Check readings against a reference thermometer twice a year.
What Mistakes Cause Thermostat Problems?
- Placing the sensor next to the evaporator or door.
- Setting the differential too small, which causes short cycling.
- Switching a compressor directly through a relay that is too small.
- Treating the thermostat as a safety device. It is a control, not a protection device.
Which Thermostats Does Haste Offer?
Haste supplies thermostats for refrigeration and AC, including Farthermost refrigeration thermostats rated -35 °C to +35 °C, as well as AKO temperature controllers. Send us your set point, supply voltage and load, and we will help match the right model.
Frequently Asked Questions
What is a thermostat in refrigeration?
It is a device that switches the compressor on and off to hold a set temperature.
What is the difference between mechanical and electronic thermostats?
Mechanical ones use a capillary and a dial. Electronic ones use a probe and display, and are more precise.
What set point should a cold room or freezer use?
Chilled storage is typically 0 to 5 °C, and frozen storage is -18 °C or below.
What is the difference between a thermostat and a temperature controller?
A thermostat mainly switches on and off. A temperature controller adds functions such as defrost and alarms.
Summary
- Thermostats switch equipment to hold a set point.
- Choose mechanical for simple jobs, electronic for accuracy, and a controller for defrost and alarms.
- Match the range, voltage, relay rating and sensor.
- Set a sensible differential to avoid short cycling.
- In UAE heat, place probes carefully and check accuracy regularly.
Haste Trading has supplied HVAC/R products in the UAE since 1983. If you are unsure which thermostat fits, get in touch with our team.
This guide draws on general refrigeration practice. Always confirm requirements against the equipment manual and local food safety rules.