Product details
Danfoss Coil for ETS 6 Electric Expansion Valve | 12V DC
Product Description:
The Danfoss 034G5140 coil is a critical electrical component for the reliable operation of the ETS 6 series expansion valves. This bipolar stepper motor coil accurately converts electrical pulses from the system controller into mechanical motion, allowing for infinite and precise adjustment of refrigerant flow. Engineered to excel in the UAE’s demanding climate, the coil is built with high-grade insulation to resist thermal degradation and moisture ingress, common in Dubai’s coastal and desert environments. Its convenient clip-on design allows for rapid installation or replacement on the valve body without requiring a system pump-down. This makes it a preferred choice for UAE service technicians maintaining modern inverter AC units and heat pumps where energy efficiency and stable superheat control are paramount.
Key Features & Benefits:
- High-Resolution Stepper Control: Enables the fine-tuned modulation necessary for the latest inverter-driven HVAC technology in the UAE.
- Robust Environmental Protection: Enclosure is designed to handle high ambient temperatures and humidity levels found in Dubai’s rooftop installations.
- Service-Friendly Design: Easy “clip-on” mechanism allows for coil replacement without breaking the refrigerant circuit, saving time for UAE contractors.
- Standardized 12V DC Power: Fully compatible with most electronic controllers used in the UAE for residential and commercial cooling.
- Vibration Resistance: Securely seats on the valve body to ensure consistent performance even near heavy-duty compressor vibrations in Dubai.
Technical Specifications :
| Specifications | Value |
| Manufacturer | Danfoss |
| Code Number | 034G5140 |
| Compatible Valve | ETS 6 (All Orifice Sizes) |
| Type | Bi-polar Stepper Motor Coil |
| Rated Voltage | 12V DC |
| Phase Resistance | 46 Ohms (±10%) |
| Protection Rating | IP66 / IP67 (Depending on installation) |
FAQs:
- Q: What makes the 034G5140 different from other ETS 6 coils in the UAE?
- A: This code often refers to specific lead wire lengths or a particular connector type required by certain AC manufacturers in the UAE for their assembly lines.
- Q: Can this coil be used on an ETS 25 or ETS Colibri valve in Dubai?
- A: No, it is strictly for the ETS 6 series. Larger valves or the Colibri series use different motor configurations.
- Q: Is it necessary to power down the system to change this coil in the UAE?
- A: While you must turn off the electrical power for safety, you do not need to recover the refrigerant, as the coil sits outside the hermetic valve body.

![018F6176 - Solenoid coil, BE230AS, DIN Spade, Supply voltage [V] AC: 220 - 230, Multi pack Danfoss](https://haste-uae.com/wp-content/uploads/2026/02/Untitled-design-13-400x400.png)


![018F6282 - Solenoid coil, BF230CS, Cable, 1.00 m, Supply voltage [V] AC: 220 - 230, Multi pack Danfoss](https://haste-uae.com/wp-content/uploads/2026/02/Untitled-design-3-8-400x400.png)
![018F6701 - Solenoid coil, BE230AS, Terminal box, Supply voltage [V] AC: 220 - 230, Multi pack Danfoss](https://haste-uae.com/wp-content/uploads/2026/02/Untitled-design-6-3-400x400.png)
